Description
Set of 4 1000cc injectors for Honda S2000 F20/F22 99-05 Injector set comes with four PnP electrical connectors (PN: CONN-US-HON) at no additional cost! All DeatschWerks injectors feature the following: E85 compatibility Flow rates and set balancing in-house by DeatschWerks Flow balanced to within 1-2% (flow report included) Excellent spray pattern and atomization for optimized idle and tuning Technical assistance and tuning data available via phone or email 3-year comprehensive warranty Injector Data Specs Fuel Pressure Range 40-90 psi Minimum Pulse Width 1.3 Maximum Duty Cycle 92% Coil Impedance 12.9 ohm Injector Type Bosch EV14 Connector Type us-car Flow Rate Nominal Static Flow Rate PSI > 43 58 70 80 90 100 cc/min 1031 1179 1295 1362 1415 1492 lb/hr 98.2 112.3 123.3 129.7 134.8 142.1 Please note: Flow rates listed are the nominal (normal minimum) rates for this injector part number. All sets are flow balanced. For actual flow rates of your set, please refer to the flow report that will accompany your order. Battery Offset Offset in Milliseconds (Pressure vs Voltage) PSI > VOLTS v 43 58 70 80 90 100 8 2.51 3.31 3.95 4.60 8.00 8.00 9 2.02 2.21 2.70 3.32 3.79 4.48 10 1.66 1.79 2.07 2.24 2.80 3.47 11 1.51 1.52 1.60 1.77 1.93 2.37 12 1.26 1.26 1.33 1.45 1.53 1.77 13 1.08 1.04 1.22 1.25 1.29 1.39 14 1.01 0.88 0.99 1.06 0.97 1.30 15 0.91 0.72 0.86 0.95 0.89 1.07 16 0.77 0.69 0.82 0.76 0.76 0.87
Reviews
There are no reviews yet.